Fill out the form below to receive the price and offer for this Equipment
CASAGRANDE B360xp – PILING
CASAGRANDE B360xp – PILING
| Equipment Type | Machinery |
| Equipment | Piling Equipment |
| Year | 2015 |
| Working Hours | 4.100 APPROX |
| Location | ITALY |
| Equipment Serial: | B360UC01** |
Here following some technical specifications of the used Casagrande B360xp – Used machinery for bored piles work:
Undercarriage: 3500 - 5000 mm
Diesel Engine: Caterpillar C15 403 kW @ 2200 rpm - Tier 3A
Rotary Head: H40 Max torque 400 kNm
Winches: Main 350 kN, auxiliary 120 kN
Pull-Down winch: Crowd/Extraction Force 600 kN, Stroke 11000 mm (I. 1600)
Kelly bar: 4 x 19,5 (508) interlocking type
Setup: counterweight lifting system with cylinder, cardan joint, hydraulic system for casing oscillator.
Diesel Engine: Caterpillar C15 403 kW @ 2200 rpm - Tier 3A
Rotary Head: H40 Max torque 400 kNm
Winches: Main 350 kN, auxiliary 120 kN
Pull-Down winch: Crowd/Extraction Force 600 kN, Stroke 11000 mm (I. 1600)
Kelly bar: 4 x 19,5 (508) interlocking type
Setup: counterweight lifting system with cylinder, cardan joint, hydraulic system for casing oscillator.
| Equipment Type | Machinery |
| Equipment | Piling Equipment |
| Year | 2015 |
| Working Hours | 4.100 APPROX |
| Location | ITALY |
| Equipment Serial: | B360UC01** |
The Casagrande B360XP is a machine dedicated to give the specialist contractor an equipment to perform large diameter rotary piling. It is the result of research and innovation based on over 50 years of experience and success of the company in the fi eld of foundations and
geotechnical engineering.
Thanks to the high torque of the rotary head up to 467 kNm (opt.), to the HD kelly bars and a powerful winch, the B360XP is able to drill quickly deep and large piles in hard soils. The crowd winch with a line pull of 600 kN and the stroke of the rotary head of 19 m will drive casings deep into the ground with extreme accuracy.
The SPM (Smart Power Management) allows an intelligent engine power management to improve performances and productivity of machinery. The XP technology monitors the istantaneus power fl ows and allocates the full available power to the job duties. The results is an increasing of the machine effi ciency.
The design guidelines have taken particular care in the welfare of the operator and its high level of professional performance. In particular, best results were obtained in terms of ergonomics, both in the cabin and outside of the machine, and with regards to noise reduction.
Request More info
